F1 LT

All SCARPA footwear uses Europeansizing, except for the skiing boots.

•  1 Euro whole size = 6.6 mm = 0.26 inches
• 1 US whole size = 8.4 mm = 0.33 inches
• Euro sizes provide a better, more precise fit for your intended use
• Only Ski mountaineering and telemark skiing boots are in MONDOPOINT size.

Upsize (½ sizes) depending on desired fit for mountaineering boots.

For climbing shoes, the choice of downsizing (1 size) depends on the desired fit. In other shoes, you need a gap between the toes and the front of the toe box, which is necessary for walking. In climbing shoes, it is preferable to eliminate gaps, to increase sensitivity and precision when climbing.

All SCARPA's ski mountaineering and telemark skiing boots ski measured in Mondo sizing. SCARPA ski boots break on the half size, this means that a half size shares the same shell length as the whole size above it but the liners are lasted for each ½ size. For example, a 25.5 and 26.0 are the same shell size but the respective liners come pre-molded to the half size. Some skiers may want to downsize up to 1 full Mondo size, depending upon personal preference.

OPTIMIZED TOURING POINT

In order to maximize all efficiencies when moving uphill, some models with TLT fittings have moved the tech toe fittings further under the foot. This effectively makes for a more natural stride that offers significant energy savings, especially important on big days!

NOTE: binding mounting location is different than standard TLT mounting instructions.

MOUNTING INSTRUCTIONS:
boot center to ski center

1. Mount the TLT heel piece in the standard mounting location.

2. To mount the TLT toe piece: move the toe rearwards from ‘standard’ mounting location, towards the heel piece, by «X», the specified distance for each boot.